The invention of hemming tape is really useful. A high-temperature glue is used to fix a hem with the double thin strip of webbing. It comes on a roll of tape and can stick to both sides of the fabric. There are many hem tape uses. It’s perfect for when you’re in a hurry or need to make a quick hem repair. Measure the hemline; put the tape between the clothing and the hem, and press. The hem is fixed with the heat of the iron and the bonding of the tape. Hems that do not have to be stitched! So scroll down to get more about tips to use a ham tap.
Tips to Use Ham Tap Correctly:
#1 – Prewash:
According to the clothing alteration service, make sure your fabric or clothing has been pre-washed and is ready to be hemmed. The fabric softener will not use the first layer because it will affect the bonding glue, making the tape stick less securely.
#2 – Shortening:
One alteration near me suggested that if you’re using hemming tape to shorten a pair of pants or a skirt, measure the length you need and add at least 1 14 inch (3 cm) for hem seam allowance. The majority of hemming tapes are 1 inch wide (2.5cm). Remember to wash your jeans before that in case they shrink.
Also Read: Why You Need To Have Your Clothing Tailored
#3 – Finishing:
If you have a sewing machine, you can finish the edge with a zig-zag stitch. Sergers are commonly used to keep the edge of the fabric from fraying. Pinking shears reduce fraying by cutting the edge in a zig-zag pattern. Don’t worry about leaving a straight raw edge if you’re not a sewer. In most fabrics, the hemming tape will seal the fabric edges and reduce fraying.
#4 – Cutting:
Cut the hemming tape to the length of the fabric to be hemmed. Measure the portion of the hem that has to be fixed and cut the tape accordingly if it’s a hem repair. Press the hem and place the tape between the hem and the garment’s wrong side. On both sides, the hemming tape is the same.
The hem should press up 1/8 inch (3mm) more than the width of the tape. I pressed the hem up 1 18 inches as my tape was 1 inch (2.5cm) (2.8cm). You don’t want any tape to extend above the hem because it will ruin your ironing.
Pay attention to the pressing instructions if there is a long area that needs to be hemmed, press and hem little sections at a time. If your outfit is delicate or made of synthetic materials, place a cotton pressing cloth between it and the fabric while ironing. You don’t want your clothes to melt!
Other Tips of Hem Tape Use:
- To get the iron temperature, fabric, and tape insertion just right, practise on a scrap.
- Securely press down with the iron. Remove after a few seconds of holding.
- For delicate fabrics, use a pressing cloth.
- Let the fabric cool before checking to see if the hemming tape has set on your test sample. The iron was not hot enough if the hem turned away.
- Make sure the hemming web isn’t visible. It’ll attach to the iron. The hemming web’s glue is tough to remove.
- Start the process in stages when you’re ready to apply the tape to your hem. It’s important to keep the tape smooth at all times and avoid bending it.
- Gently iron both sides of the hem to ensure no wrinkles or folds that may distract from the overall look.
Hemming tape is an extremely handy piece of equipment that every sewer should have on hand. Knowing how to use it takes some practice, but once you’ve mastered it, you’ll be glad that you did. If you don’t know how to use and repair clothes, a clothing alteration service is a great option for a quick solution. Prime Laundry, an alteration tailor near me in London, offers the best and high quality clothing alteration service at an affordable rate with free collection and delivery to your doorstep. Do not wait and visit and get a quick solution.